Description

Rapid Xylazine(XYL) Test Strip

Rapid Xylazine(XYL) Test Strip is a rapid, screening test for the qualitative detection of Xylazine(XYL) in human urine at the cut off of 1000 ng/ml.

For in vitro diagnostic use only. For Forensic use only.

The Cut-off Value and Approximate Detection Time

Drug(Identifier)	Cut-off level	Minimum detection time	Maximum detection time
Xylazine(XYL)	1000 ng/mL	8-24 hours	1-3 days

Intended Use

Rapid Xylazine(XYL) Test Strip is an immuno-chromato graphic assay for the qualitative determination of the presence of Xylazine(XYL) at the cut off of 1000 ng/ml. This assay provides only a preliminary analytical test result.

Gas Chromatography/Mass spectrometry (GC/MS) is the preferred confirmatory method. Clinical consideration and professional judgment should be applied to any drug of abuse test result, particularly when preliminary positive results are indicated.

Description

Product Name	Xylazine test strips (Urine)
Brand Name	CIBIO® or OEM
Format	Strip
Cutoff level	1000ng/mL
Methodology	Colloidal Gold
Kit Contents	1. Test Strip
	2. Desiccant
	3. Instruction for use
Assay Type	Qualitative Detection
Specimen	Urine
Specification	Strip:  3.0 mm; 3.5 mm; 4.0 mm
Certificates	ISO 13485
Accuracy	Over 99%
Storage Temperature	4-30 degree centigrade
Shelf Life	2 years ( 24 months )
Delivery time	15-30 days
OEM Services	Pouch, Box, Insert, private label
Loading Port	Guangzhou or Shenzhen

How To Perform The Test?

Test must be in room temperature (15°C to 30ºC)

1. Open the sealed pouch by tearing along the notch. Remove the test strip from the pouch.
2. Immerse the absorbent end into the urine sample for about 10 seconds.
   IMPORTANT : Do not allow the urine level to exceed the MAX (marker line), otherwise the test will not perform correctly.
3. Lay the strip flat on a clean, dry, non-absorbent surface.
4. Read the results at 5 minutes. The drug test results remain stable for up to thirty minutes.

Reading The Results

Preliminary positive (+)
A rose-pink band is visible in each control region. If no color band appears in the appropriate test “T” region, a preliminary positive
result is indicated for the corresponding drug of that specific test zone.

Negative (-)
If a rose-pink band is visible in each control region and the appropriate test “T” region, it indicates that the concentration of the
corresponding drug of that specific test zone is absent or below the detection limit of the test.

Invalid
If a color band is not visible in the control “C” region or a color band is only visible in the test “T” region, the test is invalid. Another test should opened and run to re -evaluate the specimen. If test still provides an invalid result, please contact the distributor from whom you purchased the product. When calling, be sure to provide the lot number for the test.